Installation Instructions
Crimp Connector
for HELIAX® FSJ1-50 Foam-dielectric
Coaxial Cable 		Bulletin 237003A
Description

This 41SPM (type mini UHF plug) connector is designed
for connection by crimping it to the outer conductor of
the cable with a crimp tool. The cable inner conductor
inserts into the inner connector.

Tools and Materials Required for Assembly
Scale
Knife
Flat file
Wire brush		 Solvent: comothene, vythene, or
other nonflammable cleaning fluid
Fine-toothed hacksaw or jeweler's saw
Type 208230 crimp tool or hex-die
crimp wrench with 0.324" (8.23 mm)
hex die cavity (thickness of crimp
must not exceed width of
connector ribbed section)
Notice

The installation, maintenance, or removal of antenna
systems requires qualified, experienced personnel.
Andrew installation instructions have been written for
such personnel. Antenna systems should be inspected
once a year by qualified personnel to verify proper
installation, maintenance, and condition of equipment.

Andrew disclaims any liability or responsibility for the
results of improper or unsafe installation practices.
Click here to see picture below enlarged

 		Click here to see picture below enlarged
Andrew Corporation
Orland Park, IL U.S.A. 60462
Andrew Antennnas
Weybridge, Surrey, Great Britain
Andrew AG
Zurich, Switzerland 		Andrew Antenna Company Ltd
Whitby, Ontario Canada
Andrew Antennas
Campbellfield, Victoria, Australia
Antennes Andrew S.A.R.L.
Buc, France 		Andrew & Cia.
Sorocaba, SP, Brazil
Antenas de Tramsmisión S.A. de C.V.
México, D.F. México
 		Andrew Corporation
Tokyo, Japan
Andrew S.R.L.
Milan, Italy
5/87
PRINTED IN U.S.A.
Page 1 of 1