4. Mount Outer Body. Add the large O-ring to the
clamping nut. Apply a thin coating of silicone grease to
the outer surface of the O-ring and the outer chamfer
surface of the outer body. Keep all connector threads
free of grease.





5. Position and Heat Shrink Tube. Slide the shrink
tube to a point 7/8" (22 mm) beyond the cable end of
the clamping nut. Apply heat around the tube to shrink
it just enough for a tight seal--do not overheat the
tube! Heating may be done with an electric heat gun,
propane torch, or butane torch.

H005-5


H005-4 H005-6
ANDREWNU
Andrew
Corporation 		Telephone:
708-349-3300 		Customer Service, 24 hours: U.S.A. * Canada *
Mexico: 1-800-255-1479
10500 West
153rd Street 		FAX (U.S.A.)
1-800-349-5444 		U.K. 0800 250055 * Republic of Ireland:
1 800 535358
Orland Park, IL
U.S.A. 60462 		Internet:
http://www.andrew.com 		Other Europe: +44 1592 782612
Page 1 of 2 -- Page 2 of 2