8.1 Refer to supplied instructions for installation of the hand crank adjustment kit.
A-325 Hardware
Proper tensioning:
1. Lubricate bolt threads with stick wax to reduce friction.
2. Insert bolt and add washer if required. Do not allow wax under flat washer.
3. Add nut and finger tighten.
4. After connections are completed, tighten bolts until surfaces are joined and nuts are snug. Do not proceed with steps 5 and 6 below unless the connection is final and is not intended to be lossened again.
5. Mark nuts and ends of bolts with straight line. See A
6. Tighten nuts further with extra long wrench or power wrench until nuts are moved 1/3 tum (120° ±30°). See B.
| Antenna Kits Parts List |
||
|---|---|---|
| Type No. | Description | Qty. |
| Reflector Assembly | 1 |
|
| Enclosure Assembly | 1 |
|
| 203031 | Enclosure Hardware Kit consists of: | |
| 47597 | RTV Sealant | 1 |
| 9963-717 | 3/4" x 3" Bolt | 4" |
| 9997-232 | 1" Flat Washer | 10* |
| 9974-10 | 3/4" Lock Washer | 4* |
| 9999-121 | 3/4" Hex Nut | 4* |
| 205936 | Convex Washer | 6 |
| 205937 | Sealant Backing Rod | 13.5 ft |
| Subreflector Subassembly | 1 | |
| 203032 | Subreflector Strut Kit consists of: | |
| 202775 | Strut Weldment | 4 |
| 49187 | Angle clip | 8 |
| 202776 | Strut Angle | 4 |
| 9963-127 | 3/8" x 2-1/4" Bolt | 22* |
| 9963-115 | 3/8" x 1" Bolt | 22* |
| 9974-63 | 3/8" Lock Washer | 44* |
| 9999-60 | 3/8" Nut | 44* |
| 203039 | 3/8" Flat Washer (oversized) | 5* |
| 233896 | Setting Bar | 1 |
| 202951 | Azimuth/Elevation Strut Kit consists of: | |
| 202835 | Strut | 1 |
| 33385-4 | Universal Joint Strut | 1 |
| 207885 | Hand Crank Adjustement Kit | 1 |
| *Includes spare(s) | ||
