Antenna Kits
for 3.7-Meter Ku-Band Earth Station Antennas
|
Installation Instructions Antenna Kits for 3.7-Meter Ku-Band Earth Station Antennas |
Bulletin 237037B
|
|
1.1 These Antenna Kits include a reflector assembly, an enclosure assembly, a 202951 azimuth/elevation strut kit, a 203031 enclosure hardware kit, a 205929 subreflector subassembly, a 207885 hard crank adjustment kit and a 300060 subreflector strut kit. 1.2 The precision-spun aluminum reflector assembly enables ease of installation and ensures accurate surface contour which provides exceptional operating characteristics in the C receive/transmit frequency band. 1.3 The enclosure assembly attaches to the rear of the reflector and provides weather protection for rf equipment and can accomodate up to a 4-port combiner network. Thoroughly Before Assembly Required for Assembly |
2.0 Antenna Kit Assembly 2.1 The following major assemblies are required to install the 3.7-meter antenna kit. Check all assemblies before beginning installation. Refer to parts list for detailed description.
3.0 Enclosure Assembly 3.1 Refer to Figure 1. Carefully remove rear covers and corresponding sie panels from enclosure assembly. Raise enclosure assembly and attach as shown using 3/4 in. by 3 in. bolts, flat washers, convex washers, lock washers and nuts. Install supplied sealant backing rod material around entire circumference of |
|||||||||||||||||||||||||||||||||
