Installation Instructions
Type 207106
Radome Replacement Kit
for Four-foot (1.2 m) Shielded Antennas
 Bulletin 237044
Description
This kit contains a TEGULAR® radome and springs to replace an Andrew planar radome for a four-foot (1.2 m) shielded antenna.

Notice

The installation, maintenance or removal of antenna systems requires qualified, experienced personnel. Andrew installation instructions have been written for such personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance and condition of equipment.

Andrew disclaims any liability or responsibility for the results of improper or unsafe installation practices.

Read the Following Instructions
Thoroughly Before Assembly
1. Remove Old Radome. Unhook the radome springs from the radome brackets and plates, and remove the radome.

2. Install New Radome. Carefully unroll the new radome and position it against the antenna shield with the flash symbol in the upper center as shown. Do not allow folding of the radome because creases can damage it. Start connection of the radome with four new springs spaced 90° apart. Then add the remaining new springs, checking to see that the radome remains centered on the shield.


Andrew Corporation 10500 W. 153rd St.
Orland Park, IL U.S.A. 60462
Andrew Antennnas
Weybridge, Surrey, Great Britain
Andrew Antenna Company Ltd.
Whitby, Ontario, Canada
Andrew Antennas
Campbellfield, Victoria, Australia
Andrew AG
Zurich, Switzerland 		Andrew & Cia.
Sorocaba, SP, Brazil
Antenas de Tramsmisión S.A. de C.V.
México, D.F. México
Antennes Andrew S.A.R.L.
Buc, France
Andrew Corporation
Tokyo, Japan
Andrew S.R.L.
Milan, Italy

4/87
PRINTED IN U.S.A.
Page 1 of 1