Installation Instructions
Type R4E
Radome
for 4-foot Parabolic Antennas
 Bulletin 237056
The R4E radome provides the feed of a 4-foot (1.2 m) antenna with protection against weather and physical damage.

Read the Instructions
Thoroughly Before Assembly

Step 1. Use two persons to handle radome.

Step 2. Place radome rim flat against rim of reflector. See that red flash trademark is positioned as shown in Figure 1. Make sure it is not upside down. Align holes.

Step 3. Use 18 bolts to secure radome to reflector. Refer to Section A-A. Tighten bolts evenly.

Notice
The installation, maintenance, or removal of antenna systems requires qualified, experienced personnel. Andrew installation instructions have been written for such personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment.

Andrew disclaims any liability or responsibility for the results of improper or unsafe installation practices.


Andrew Corporation 10500 W. 153rd St.
Orland Park, IL U.S.A. 60462
Andrew Antennnas
Weybridge, Surrey, Great Britain
 Andrew Antenna Company Ltd.
Whitby, Ontario, Canada
Andrew Antennas
Campbellfield, Victoria, Australia
Andrew AG
Zurich, Switzerland 		Andrew & Cia.
Sorocaba, SP, Brazil
Antenas de Tramsmisión S.A. de C.V.
México, D.F. México
Antennes Andrew S.A.R.L.
Buc, France 		Andrew Corporation
Tokyo, Japan
Andrew S.R.L.
Milan, Italy
10/87
PRINTED IN U.S.A.
Page 1 of 1