Installation Instructions
Types R10G and 39193B
Radomes
for 10-ft (3 m) Parabolic Antennas
 Bulletin 237062A
Description
These radomes provide the feeds of 10-ft (3 m) parabolic antennas with protection against weather and physical damage. Type 39193B is an extra-strength version of Type R10G.

Notice
The installation, maintenance, or removal of antenna systems requires qualified, experienced personnel. Andrew installation instructions have been written for such personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment.

Andrew disclaims any liability or responsibility for the results of improper or unsafe installation practices.

Read the Following Instructions
Thoroughly Before Assembly
Have four persons handle the radome and place it against the reflector rim so that the flash trademark is correctly positioned as shown. Align the holes and use 16 bolts to attach the radome and lighten them evenly. Make sure that two flat washers are used as shown.


Andrew Corporation 10500 W. 153rd St.
Orland Park, IL U.S.A. 60462
Andrew Antennnas
Weybridge, Surrey, Great Britain
 Andrew Antenna Company Ltd.
Whitby, Ontario, Canada
Andrew Antennas
Campbellfield, Victoria, Australia
Andrew AG
Zurich, Switzerland 		Andrew & Cia.
Sorocaba, SP, Brazil
Antenas de Tramsmisión S.A. de C.V.
México, D.F. México
Antennes Andrew S.A.R.L.
Buc, France 		Andrew Corporation
Tokyo, Japan
Andrew S.R.L.
Milan, Italy
8/88
PRINTED IN U.S.A.
Page 1 of 1