Description
These hanger kfts and accessory kits are designed for
mounting vertical and horizontal runs of RADIAX slotted
coaxial cables. Each kit contains ten items. The kits are
used with the following cable sizes:
Hanger kit
(10 pieces) |
Cable size and type |
Hanger
spacing
ft (m) |
| 209800-8 |
1/4" RX1-2, RX1-2RN |
3 (0.0) |
| 209800-10 |
1/4" RX1-2RNT;
3/8" RXL2-2, RXL2-2RN |
3 (0.9)
5 (1.5) |
| 209800-12 |
3/8" RXL2-2RNT |
5 (1.5) |
| 209800-15 |
1/2" RXL4-1, RXL4-1RN,
RXL4-2, RXL-2RN,
RXL4-3, RXL4-3RN |
5 (1.5) |
| 209800-17 |
1/2" RXL4-1RNT, RXL4-2RNT,
RXL4-3RNT |
5 (1.5) |
| 209800-25 |
7/8" RXL5-1, RXL5-1RN |
5 (1.5) |
| 209800-28 |
7/8" RXL5-1RNT |
5 (1.5) |
| 209800-36 |
1-1/4" RXL6-1, RXL6-1RN |
7 (2.1) |
| 209800-40 |
1-1/4" RXL6-1RNT1, RXL6-1RNT |
7 (2.1) |
| 209800-47 |
1-5/8" RXL7-1, RXL7-1RN,
RXL7-1RNT |
7 (2.1) |
Accessory
kit
(10 pieces) |
Use |
| 209795 |
Standoff for spacing
hanger 2" from
mounting surface |
 |
| 209797 |
Flange inserts into
hanger slot to accept
1/4"-20 threaded rod |
 |
| 209798 |
Adaptor for attaching
3/8"-16 threaded rod
to flange |
 |
| 209799 |
Threaded stud, 1/4" 20
x 1/2", for attaching
flanges of two hangers
together |
|
| 223160 |
Adaptor for attaching
hanger to strut |
 |
|
Spread jaws and
insert cable
|
Firmly push to engage first or
second locking tooth of outer jaw
|
Pressure at these points from
cable forces hanger closer
|
Hanger closure at first
locking tooth
|
Notice
The installation, maintenance, or removal of antenna systems requires qualified, experienced personnel.
Andrew systems should be inspected once a year by qualified personnel
to verify proper installation,
maintenance, and condition of equipment.
Andrew disclaims any liability or responsiblity for the
results of improper or unsafe installation practices.
|
