ValuLineTM Antenna
Mount
|
Installation Instructions ValuLineTM Antenna Mount |
Bulletin 237307
|
Click here to see picture below enlarged This mount is designed to be attached to a ValuLine antenna reflector and to provide for mounting the antenna on a 4-1/2" (114 mm) diameter vertical tower pipe. A strut is used to connect the bottom of the mount to a tower member for extra stability. The antenna center is located 10.4" (264 mm) from the vertical tower pipe center. This provides clearance necessary for the antenna feed components and connections. The mount includes separate turnbuckles for plus or minus 15° azimuth adjustment and plus or minus 20° elevation adjustement. |
systems requires qualified, experienced personnel. Andrew installation instructions have been written for such personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment. Andrew disclaims any liability or responsibility for the results of improper or unsafe installation practices. Click here to see picture below enlarged 
|