|
2.3.3 Dehydrator Shelf Mounting
For shelf or stationary bench top mounting, route
electrical wiring and tubing through holes at the
rear or right side of the dehydrator.
|
|
2.3.4 Mounting The Single Output Valve
The assembly consists of a 3/8" compression
fitting. On/Off valve, barbed fitting for connection to
the dryer tube and an anchor bracket with machine
screw and nut.
Mount the assembly on the inside rear or right side
walls in the area behind the dryer tubes. Insert
compression fitting through a hole, place the
anchor bracket over the fitting and attach the
assembly to the chassis using the machine screw
and nut.
|
|
2.3.5 Mounting The DP-4-001 Distribution Panel
The distribution panel mounts in a standard 19"
equipment rack or directly to a dehydrator.
Rack mounting. Mount the panel directly above
the dehydrator to simplify connections. Screws are
provided.
Mounting to dehydrator Secure the distribution
panel to the top of the dehydrator, using brackets
and screws supplied in the parts bag. Distribution
panel should be flush with dehydrator panel.
|