Index of /download/NoCatSplash

 Name                    Last modified       Size  Description

 Parent Directory        22-Jul-2003 02:36      -  
 ChangeLog               05-Aug-2003 03:30     7k  
 NEWS                    02-Jan-2003 03:30     0k  
 NoCatSplash-nightly.tgz 05-Aug-2003 03:30   106k  

NoCatSplash is a Open Public Network Gateway Daemon.  It performs as a
[captive/open/active] portal.  When run on a gateway/router on a network,
all web requests are redirected until the client either logs in or clicks
"I Accept" to an AUP. The gateway daemon then changes the firewall rules
on the gateway to pass traffic for that client (based on IP address and
MAC address).

NoCatSplash is the successor to NoCatAuth, which was written in Perl.
NoCatSplash is written in multi-threaded ANSI C in order to be smaller
and work better on embedded style devices.

*** Quickstart

./configure
make 
make install
vi /usr/local/etc/nocat.conf
/usr/local/sbin/splashd &

*** Requirements - Current

- Linux
 * glib 1.2
 * iptables
 * netfilter kernel modules for NAT, redirection, etc.

*** Requirements - Future Version

- FreeBSD
 * ipfw - no MAC address filtering
 * ipfwv2 - includes MAC address filtering
 * gmake

- OpenBSD
 * pfctl

- NetBSD

- Mac OS X

*** Building NoCatSplash for normal operation

To build and configure the NoCatSplash gateway, run:

$ cd NoCatSplash-nightly
$ ./configure
$ make 

Then, as root:

# make install
# vi /usr/local/etc/nocat.conf [or use your editor of choice]

In addition to the usual GNU ./configure options, NoCatSplash also supports:

  --prefix =  <path to install>  defaults to /usr/local
  --with-firewall=looback      Compiles with "loopback" firewall scripts 
                               for testing
  --with-ghttpd          Also compiles ghttpd for local web server testing

*** Running the NoCatSplash gateway

To run the NoCatSplash gateway, you must be root. Run:

# export PATH=$PATH:/sbin
# ./splashd &

In particular, you need to make sure that iptables can be found via the
PATH environment variable before executing splashd.

*** Building NoCatSplash for testing purposes

You can build NoCatSplash with the "loopback" firewall scripts in order
to test it on a machine without any network connection:

$ cd splash
$ ./configure --prefix=/tmp/nocat --with-firewall=loopback \
     --with-ghttpd
$ make
$ make install
$ vi /tmp/nocat/etc/nocat.conf

Set "LoginTimeout" to a low value, say, 120 seconds. As root, run:

# /tmp/nocat/sbin/ghttpd &
# /tmp/nocat/sbin/splashd

If you're not currently running a web server,  this will
start ghttpd, a lightweight web server, running on port 80,
serving data out of the DocumentRoot specified in nocat.conf.
Then run /tmp/nocat/sbin/splashd. Open a browser, and go to
http://localhost/test.html or some other page on your local web
server. You should be captured and allowed to log in, at which point you
should be directed to the web page you attempted to visit. You should
be able to browse your local web server until your login expires.

*** Getting NoCatSplash from CVS

From a shell, run:

$ cvs -d:pserver:anonymous@cvs.nocat.net:/cvsroot login
(Hit "Enter" when prompted for a password.)
$ cvs -d:pserver:anonymous@cvs.nocat.net:/cvsroot co splash

*** Notes

NoCatSplash only runs on Linux at present.  We will very shortly
address the portability issues, most of which will crop up in and around
autodetecting network interfaces and reading the kernel ARP table.

People who have been paying attention will note that I've temporarily
thrown out my original design for NoCatSplash, and concentrated on
building a simplified rendition of the NoCatAuth Open mode in C. This
is deliberate. The original design was nice, but too baroque for getting
this project off the ground.

Anyway, this code is going to change very rapidly. It might
not be fancy, but it should work. Comments and questions welcome.

SDE <schuyler@nocat.net>