|
3.1 Refer to Figure 4. Install clamp to adaptor at indicated locations using fillister head screw and lock washer as shown. Tighten until snug only. |
3.2 Refer to Figure 5. Position the slotted flat of the adaptor above the angle and install the clamp onto the angle as shown. The outer edge of the angle should be inserted between the clamp's saw tooth and square head bolt. Using wrench fully tighten square head bolt. 3.3 Fully tighten fillister head screw attaching clamp to adaptor. Torque to 5 ft-lb. |
|
Andrew Corporation Orland Park, IL U.S.A. 60462 Andrew Antennnas Weybridge, Surrey, Great Britain Andrew AG Zurich, Switzerland |
Andrew Antenna Company Ltd Whitby, Ontario Canada Andrew Antennas Campbellfield, Victoria, Australia Antennes Andrew S.A.R.L. Buc, France |
Andrew & Cia. Sorocaba, SP, Brazil Antenas de Tramsmisión S.A. de C.V. México, D.F. México |
Andrew Corporation Tokyo, Japan Andrew S.R.L. Milan, Italy 5/87 PRINTED IN U.S.A. |