6.0 Subreflector Assembly
6.1 Refer to Figure 3. Preassemble 202775 strut weldments
as shown using 202776 strut angles and 3/8 in. by 2-1/4 in. bolts,
lock washers and nuts.
6.2 Position and attach subreflector mounting ring (part of
205929 subreflector subassembly) to corresponding mounting holes
in strut support plates (part 202775 strut weldment) using 3/8 in.
by 1 in. bolts, oversized flat washers, lock washers and nuts.
Note: Ensure one subreflector adjustment stud is located at
6 o'clock position.
Click here to see picture below enlarged
Page 2 of 6 -- Page 3 of 6 --
Page 4 of 6