6.3 Refer to Figure 4. Attach 49187 angle clips around
reflector perimeter at indicated positions using 3/8 in. by 1
in. bolts, lock washers and nuts.
6.4 Raise and attach preassembled subreflector strut
assemblies between corresponding angle clips using 3/8 in.
by 2-1/4 in. bolts, lock washers and nuts. Note: Ensure
one subreflector adjustment stud is located at 6 o'clock position.
Click here to see picture below enlarged
![](Images/237037Bf4.gif)
Page 3 of 6 -- Page 4 of 6 --
Page 5 of 6