Loosen the azimuth adjustment nut shown in Figure 4 and swing the antenna to the left or right for the desired azimuth. Then tighten the nut.
5. Attach the two blinker plate assemblies to reflector rim with bolts, flat washers, lock washers, and nuts as shown in Figure 5. Tighten the bolts to form each blinker assembly to the shape of the reflector.
6. Make the connection to the feed flange and be sure to insert a gasket between the flanges. Fasten the flanges together with 8-32 screws, lock washers, and nuts. Use an allen wrench to tighten the screws.
| Parts List | ||
|---|---|---|
| Type No. | Description | Qty. |
| 201235-2 | Mount assembly: | 1 |
| 11890-18 | Hose clamp | 1 |
| 9974-64 | 1/2" lock washer | 4 |
| 14179 | Pipe clamp base | 1 |
| 14178 | Pipe clamp cap | 1 |
| 9934-179 | 1/2 x 4-1/2 in (114 mm) stud | 1 |
| 9934-222 | 1/2 x 6 in (152 mm) stud | 1 |
| 9963-186 | 1/2 x 1-1/2 in (38 mm) hex head bolt | 1 |
| 9997-57 | 1/2" flat washer | 3 |
| 9999-61 | 1/2" hex nut | 7 |
| 40688-2 | Mount angle | 1 |
| 9974-17 | 5/16" split lock washer | 2 |
| 9999-59 | 5/16" hex nut | 2 |
| 202425 | Reflector Assembly | 1 |
| 202335-2 | Feed Assembly: | 1 |
| 202394 | Blinker plate kit: | 1 |
| 202393 | 2 | |
| 9999-57 | 6 | |
| 9974-15 | 6 | |
| 9997-42 | 6 | |
| 9963-134 | 6 | |
| 202420 | Feed hub hardware kit: | 1 |
| 202419 | 4 | |
| 9963-75 | 4 | |
| 9974-15 | 4 | |
| 64757-90 | Feed flange hardware kit: | 1 |
| 9903-18 | 1 | |
| 9972-52 | 4 | |
| 9998-54 | 4 | |
| 9974-70 | 4 | |
| 10683-329 | 2 | |
