|
For hook installations: Pull the free end of the rope to provide a 1" (25.4- mm) long loop between the clamp and hook while maintaining the required guy line dimension. Fasten the rope by squeezing the rope clamp with pliers in three places and trim off the excess rope. |
|
4 |
Pass the feed end of the guy line through the guy hole in the reflector. Hook the guy lines to the feed anchor ring. Adjust each guy line behind the reflector so that the line guide is aligned with the guy rope. |
|
Andrew Corporation |
Telephone: 708-349-3300 |
Customer Service, 24 hours: U.S.A. * Canada * Mexico: 1-800-255-1479 |
|
10500 West 153rd Street |
FAX (U.S.A.) 1-800-349-5444 |
U.K. 0800 250055 * Republic of Ireland: 1 800 535358 |
|
Orland Park, IL U.S.A. 60462 |
Internet: http://www.andrew.com |
Other Europe: +44 1592 782612 |